Step-by-Step Guide: How to Install High Voltage & Low Voltage Pool Lighting

Proper pool lighting installation not only saves energy but also ensures safety. Incorrect installation may result in dim lights, non-functioning lights, or water intrusion, all of which can be dangerous. Ensuring proper installation is crucial for both functionality and safety.

Here is a step-by-step process of installing both high voltage and low voltage pool lights, ensuring you have the knowledge to illuminate your pool area effectively.

Overview of High Voltage and Low Voltage LED Pool Lights

Low voltage pool lights typically operate at 12v or 24v, while high voltage pool lights operate at 120v and 240v.

You can get more from our previous blog Understanding Pool Lighting Voltage: Is 12V, 24V, 120V, or 240V the Right Choice.

Preparing for Installation

1. Safety Precautions and Regulations

Turning off the power supply before starting any installation work. And wear protective gear and know about local electrical codes and regulations.

In Australia and New Zealand, the luminaires installed in a swimming or spa pool shall be supplied by SELV at an output nominal voltage not exceeding 12 V a.c. or 30 V ripple-free d.c(Clause 6.3.4.5 of AS/NZS 3000:2018).

STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND Amendment No. 1 to AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules).

Thus, pay attention to the local codes and regulations to avoid breaking the law.

2. Tools and Materials Needed for Installation

Tools:

Safety goggles and gloves

Voltage tester

Screwdrivers (Phillips and flathead)

Multimeter

Materials:

High voltage or low voltage pool light strips

Power supply(for low voltage systems)

Controller

Waterproof junction boxes

Extend electrical cable(if you need to extend the cable)

Mounting buckles for light strips

3. Planning the Layout and Design of Swimming Pool Lighting

Design Considerations: Plan the swimming pool lighting layout to ensure even illumination around the pool. Consider the placement of swimming pool led light strips to highlight key features and enhance the pool's aesthetics.

Wiring Path: Determine the wiring path and ensure it's clear of obstacles. Plan the placement of junction boxes and transformers for easy access and maintenance.

Power Source: Identify the location of the power source and ensure it can handle the load of the new lighting system. If necessary, consult a licensed electrician to verify your electrical system's capacity.

If you are not sure how to design the layout and design of pool led lighting, contact PaneraLux. Our experts can help you.

Step-by-Step Guide to Installing Low Voltage Pool Lighting(Using PaneraLux Accessories as an Example)

1. Turning off Power and Preparing the Site Firstly

Turn off power and use a voltage tester to confirm no electrical current is present. Clear the installation area of any debris or obstacles. Mark the locations where the pool led strip lights and table will be installed according to the layout.

2. Installing the Power Supply and Controller

PaneraLux power supply includes a waterproof junction box, uses a Phillips screwdriver to unscrew the end cover of the junction box and pass and connect the high-voltage power wire (provided by you) into the junction box.

Tighten the end caps at both ends to ensure IP67 waterproofing, and secure the top cover with screws.

And if you ordered a controller from PaneraLux which with a matched waterproof junction box, you shall connect the wires at the output end of the power supply to the controller by a flathead screwdriver, and tighten the end caps of the controllers' waterproof box to ensure IP67 waterproofing, and fix the top cover with screws by a Phillips screwdriver.

3. Installing the Cable and Mount Buckles for Low Voltage Pool Lights

Run the electrical cable through conduit you prepared to the installation site. Secure the mounting buckles(top mount buckles or side mount buckles) along the planned path. Ensure they are evenly spaced and firmly attached.

4. Mounting the Low Voltage Pool Light

Attach the led strip lights for pool coping to the mounting clips following the instructions on our pool light page.

More installation details in PaneraLux Pool Lights: The Ultimate Solution for Nighttime Swimming and Pool Parties.

5. Connecting the Light to the Controller

Connect the light strip wiring to the low voltage wiring running from the controller, and tighten the caps.

6. Testing the Installation and Ensuring Safety

Restore power and test the low voltage pool light strips to ensure they are functioning correctly. Use a multimeter to verify proper voltage levels.

Inspect all connections and fixtures for any signs of damage or improper installation. Ensure the light strips are securely mounted and properly sealed.

Step-by-Step Guide to Installing High Voltage Pool Lights(Similar to Low Voltage Pool Lights)

1. Turning off Power and Preparing the Site

Turn off power and use a voltage tester to confirm no electrical current is present. Clear the installation area of any debris or obstacles. Mark the locations where the light strips and table will be installed according to the layout.

2. Installing the Cable and Buckles

Run the electrical cable through conduit you prepared to the installation site. Secure the mounting buckles(top mount buckles or side mount buckles) along the planned path. Ensure they are evenly spaced and firmly attached.

3. Mounting the High Voltage Pool Light Strip

Attach the led light strips for pool to the mounting clips following the instructions by suppliers.

4. Connecting the Light to the Power Supply

The only difference is connecting the light strip wiring to the electrical wiring running from the power supply. Use waterproof wire connectors to ensure a secure and safe connection.

Apply waterproof sealant around the connections to prevent water intrusion.

5. Testing the Installation and Ensuring Safety

Restore power and test the low voltage pool light strips to ensure they are functioning correctly. Use a multimeter to verify proper voltage levels.

Inspect all connections and fixtures for any signs of damage or improper installation. Ensure the pool strip lights are securely mounted and properly sealed.

For expert advice and assistance in choosing the perfect LED strip lights for your outdoor space, feel free to reach out to our team. Email or click the icon in the bottom right corner, chat with us and you can get professional advice soon.

These articles might be of interest to you:

Worried about led lights fire hazard? Are led lights a fire hazard? It's for you: Are LED Lights a Fire Hazard?

Don't know how to change pool lights for lux pool or how to install pool lights? It's for you: How do I change the light in my underwater pool?

Want to know how to wire pool lights and outdoor lights? It's for you: Setting up for Outdoor Lights and Pool Light Wiring Video

Confused about the swimming pool light voltage? Hesitate between choosing a 12v vs 120v pool light? It's for you: Understanding Pool Lighting Voltage: Is 12V, 24V, 120V, or 240V the Right Choice

Related knowledge of waterproof lights for pool: 3 Steps to Choose Waterproof LED Strip Lights for Outdoor Use

How to Make LED Outdoor Light Strips Waterproof

More outdoor LED strip lighting ideas: 10 Ideas Outdoor Patio Lighting Design Only by LED Strips Outside

Check 10 factors before review: 10 Factors Affect LED Strip Light Brightness