How to connect the Remote Control with controller?

Paneralux's remote control has been connected to the controller before shipment, and there is no need to make any further connections. If you find that they cannot connect during use, you can follow the steps below to complete the connection.

Using the RGB remote control as an example:

Step1. Set the controller to RGB mode. Long-press the button on the controller for 3 seconds. After this, the purple light on the controller will turn off and then light up again.

Step2. Keep holding the button without releasing it. The controller will enter the light mode selection.

Step3. The indicator light will cycle through white-yellow-red-green-blue lights. Release the button when the indicator light turns red. After two purple blinks, the indicator light will remain red. The controller is now in RGB mode.

Step4. Press the button on the controller once. The indicator light on the controller will blink. At the same time, press and hold the power button on the remote control. When the indicator light on the remote control turns on, it means the connection is successful.

Note: The connection process for both single-color and RGB remote controls is the same. To avoid repetition, users can proceed directly to step three after completing the connection between the controller and the app.