Multiple Outdoor Light Strip for Step

Step-by-Step: Connect Multiple LED Lighting for Steps

LED lights enhance both safety and aesthetics on steps. PaneraLux Outdoor Step Lights are an excellent option, illuminating paths and reducing fall risks.

Many wonder, " Are Outdoor Stair Lights Worth It? " Absolutely, they are.

And now, learn how to connect multiple led step lights effortlessly with these insights.

Getting Ready to Install Exterior Step Lights LED

Obviously, we need to prepare some before connection the led stair lights outdoor :

  1. Lights : You can’t connect without your step lights. If you are just looking to learn how to link multiple light strips before purchasing, shouldn't miss our previous blog to select top outdoor LED step lights .
  2. Power supply
  3. Controller
  4. Extension cable for single color outdoor step lights
  5. IP67 waterproof connector
  6. Bare wire
  7. Scissors
  8. Screwdriver
  9. Measuring tape
  10. Drill
  11. Glass adhesive

Choose the right power supply/controller or other accessories, if you are not sure, feel free to contact us online.

Planning the Setup Stair Step Lighting

Correct measurements help fit your LED lights perfectly:

  1. Use a measuring tape to find each step's width.
  2. Write down measurements to keep them the same on all steps.
  3. Cut and reseal the outdoor step lights to suitable length. You can do that by our tutorial video to Cut and Reseal Your Stair LED Strip Lights
  4. Think about height between steps for best light spots.

Installing the Stair LED Strip Lights

Connect the Power Cable with Power Supply

Link power cable with power supply

Connect the Controller to the Power Supply

Link cable with controller

Insert the red wire into the positive port of the controller, and the black wire into the negative port of the controller.

Tighten the screws of controller

Tighten the screws, seal the cover, and tighten the waterproof junction box sealing screws to prevent water from entering.

Connect the Controller to the Extension Cable

Link controller with extension cable

Connect the controller to the extension cable, and tighten the cable glands.

Link extension cable with waterproof box

Connect the extension cable to the waterproof box, tighten the cable glands.

Connect the LED Lights for Outdoor Steps

Link outdoor step light with waterproof box

Attaching the Lights to the Steps

There are two mounting ways:

    1. Aluminum profile installation

      First, put the LED lights on each step. Make sure they match your measurements. Use a drill to make holes for the lights. Put screws in and tighten them to keep lights steady. This stops them from moving or falling off, making it safer and nicer.

      Stair Step lighting Aluminum Profile Installation
        2. Flush mounting

          Install staircase led strip lights in the grooves of the steps, apply glass adhesive to the backing.

          LED light strips for steps Flush Mounting from PaneraLux

          Connecting the Wiring

          Cut the bare cable

          Cut and prepare the bare wires according to the length of the place you want to install outdoor step lights.

          Screw the sealing screws of the waterproof junction box.

          Reuse bare cable and waterproof box with multiple LED lighting for steps until all the lights are installed. 

          Testing the System

          Ensuring All Lights Are Functioning

          After setup, test if all lights work. Turn on power and look at each light. They should all shine equally bright. If one doesn’t light up, check connections again.

          Multiple outdoor lights for step showcase

          Troubleshooting Common Issues

          Fixing problems means finding and solving them fast. If a light is out, check wires for loose parts or wrong links. Ensure power is on with the right voltage. Change bad connectors or wires to fix it. Regular checks help keep under step lighting working long.

          You can also visit our YouTube channel to learn how to connect outdoor stair lighting systems . This will help you get the best results.

          LED lights are great for steps. They make them safer and look better. These lights use less energy and last long, saving money. Follow the guide to set them up right. Clearing and maintaining the light is equally important, explore 10 tips to clear and maintain LED strip lights effectively.


          For expert advice and assistance in choosing the perfect landscape LED strip lights for your outdoor space, feel free to reach out to our team. Email or click the icon in the bottom right corner, chat with us and you can get professional advice soon.

          Related Connection Video for Outdoor Stair Lighting System:

           

          Back to blog

          Leave a comment

          You may like