How to Design Pool Lighting for a Pool Under Construction PaneraLux

How to Design Pool Lighting for a Pool Under Construction

If your pool is under construction, then we can design the proper distribution and mounting locations for your pool lighting. Many pools that have already been built to install pool light strips run into a lot of problems with wiring harness concealment. For example, the power cord for the light strip cannot be hidden by pre-built conduit. The pool deck is not thick enough to allow the light strip to be secured with expansion bolts. We can recommend the right size of pre-buried conduit for you, and the right installation based on the size of your pool deck. This is the pool lighting plan we designed for Randy's pool under construction:

Randy's Pool Overview:

Randy's pool lighting needs:

  1. The whole pool is divided into two parts: the pool body and the walkway.
  2. The pool part needs 1144cm (450.4in) pool light strip, installed under the pool deck.
  3. The walkway part needs two light strips respectively: 497cm (195.7in) and 670cm (263.8in)
  4. Pool body part and walkway light strip need to be controlled separately.
  5. Please recommend the right size of pre-buried pipe to hide the extra wiring harness.

 

PaneraLux's pool lighting program for Randy:

1.Pool lights system drawing 

2.Components of the entire pool area lighting system

     Pool body part

1*pc 11.44m (37.5ft) RGB pool light

1*pc 5m (16.4ft) extension cable

1*pc RGB controller

1*pc 75W power supply

1*pc RGB remote control

   Pool walkway part

1*pc 4.97m (16.3ft) RGB pool light

1*pc 6.7m (22ft) RGB pool light

1*pc distributor

1*pc 5m (16.4ft) extension cable

1*pc 10m (32.8ft) extension cable

1*pc RGB controller

1*pc 75W power supply

 

3.How to hide extension cable and other components?

1> Laying PVC piping under the pool walkway. Recommended inner diameter of PVC pipe: 25/30 mm (1in/1.2in) . Depending on whether you want to lay 1 or 2 extension cables in the PVC pipe.

2> The rest of the pool light system parts can be put in electric box.

 

4.Customer wants to install under the pool deck

In order to avoid damage to the pool deck, the thickness of the pool deck needs to be ≥ 3.5 cm (1.38in). it is recommended to use silicone adhesive to fix the pool light strip.

Back to blog

Leave a comment

You may like